Drive System/'s
-AC DriveBattery Type/'s
All Battery TypesManufacture Dates
Between 02/27/2023 Thru 12/31/2024
Obtain diagnostics information by observing the fault codes flashed by the controller’s status indicator. Controller is located in the passenger's side rear inner fender. The status indicator is a translucent window on the cover, which blinks red and yellow LEDs. Its illumination indicates the following information:
Off: Controller is not powered on or is severely damaged.
Slow yellow blinking: Controller is operating normally.
Solid yellow or orange: Controller is in flash program mode, or corrupted software is preventing the unit from completing the startup sequence (boot process).
Red/yellow flashing pattern: Fault code, review the fault table.
Solid red: Internal hardware fault detected by the supervisor or primary microprocessor, or the controller has no software loaded.
